Rmon Features Of The Switch - 3Com OfficeConnect 140M User Manual

3-8 C 3: A
HAPTER BOUT

RMON Features of the Switch

Table 3-1 details the RMON support provided by the
switch. You must have an RMON application to use
these features; refer to
For information on how to use RMON, refer to the
documentation that accompanies your RMON
application.
Table 3-1 RMON support supplied by the Switch
RMON Group Support supplied by the Switch
Statistics A new or initialized switch has one Statistics
session per port or unit.
Packet Size Distribution will only be displayed on a
per port basis.
History A new or initialized switch has a number of
History sessions on the ports and unit.
S M
WITCH ANAGEMENT
"RMON" on page 3-3.
Table 3-1 RMON support supplied by the Switch
RMON Group Support supplied by the Switch
Alarms Although up to 700 alarms can be defined for
the switch, a new or initialized switch has four
alarms defined for each port:
Bandwidth used
Broadcast bandwidth used
Percentage of packets forwarded
Errors per 10000 packets
You can modify these alarms using an RMON
management application, but you cannot create
or delete them.
Hosts A new or initialized switch has one Host session
on the unit.
Hosts Top N Although Hosts Top N is supported by the
switch, there are no Hosts Top N sessions
defined on a new or initialized switch.
Matrix A new or initialized switch has one Matrix
session on the unit.
Filter The Filter group is not presently supported by
the switch.
Capture The Capture group is not presently supported
by the switch.
Events A new or initialized switch has events defined
for use with the default alarm system.