Operating controls
6.1.1
Display
After switching on the supply voltage, the current firmware is displayed for two seconds.
Afterwards, the start screen appears.
%
On starting up the actuator for the first time, the start screen and the error reading E00 (no initializa-
tion performed) appear in alternating sequence.
Fig. 6-2: Start screen after starting up the actuator for the first time
Start screen
The start screen depends on the selected application (see the 'Start-up and configuration'
section). On starting up the actuator for the first time and after loading default settings, the
positioner application (POSI, see Fig. 6-2) is automatically selected.
6-2
EB 8331-4 EN