Download Print this page

GE AF-600 FP Series Instruction

Opcaio analog i/o option module
Hide thumbs

Advertisement

Quick Links

GE Consumer & Industrial
Electrical Distribution
AF-600 FP
TM
OPCAIO Analog I/O Option Module
Instruction

Advertisement

loading

  Related Manuals for GE AF-600 FP Series

  Summary of Contents for GE AF-600 FP Series

  • Page 1 GE Consumer & Industrial Electrical Distribution AF-600 FP OPCAIO Analog I/O Option Module Instruction...
  • Page 2 Analog I/O Instruction 1 Analog I/O Option OPCAIO 1.1 Introduction 1.1.1 OPCAIO Analog I/O Option Module The Analog I/O card is supposed to be used in the following cases: • Providing battery back-up of clock function on control card • As general extension of analog I/O selection available on control card •...
  • Page 3 Analog I/O Instruction Please note the values available within the different standard groups of resistors: E12: Closest standard value is 470Ω, creating an input of 449.9Ω and 8.997V. E24: Closest standard value is 510Ω, creating an input of 486.4Ω and 9.728V. E48: Closest standard value is 511Ω, creating an input of 487.3Ω...
  • Page 4: Mounting Guidelines

    Analog I/O Instruction 1.1.2 Product Number - OPCAIO 1.2 Mounting Guidelines 1.2.1 Mounting of Option Modules in Slot B The power to the frequency converter must be disconnected. For Unit Sizes 12, 13 and 23: • Remove the Keypad, the terminal cover, and the Keypad frame from the frequency converter. •...
  • Page 5 Analog I/O Instruction Unit Sizes 12, 13 and 23 Unit Sizes 15, 21, 22, 24, 31, 32, 33, 34, 4X, 5X and 6X...
  • Page 6 Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred to the GE company. AF-600 FP are trademarks of the General Electric Company.