Parameter Menu Structure; Quick Menu Structure - GE AF-600 FP Series Design And Installation Manual

About Programming
Parameter International
default parameter
value
AN-50 Terminal 42 Speed 0-HighLim
Output
H-04 Auto-Reset Manual reset
(Times)
Table 5.1 International/North American Default Parameter Settings
Note 1: P-07 Motor Power [kW] is only visible when K-03 Regional
Settings is set to [0] International.
Note 2: P-02 Motor Power [HP], is only visible when K-03 Regional
Settings is set to [1] North America.
Note 3: This parameter is only visible when K-02 Motor Speed Unit is
set to [0] RPM.
Note 4: This parameter is only visible when K-02 Motor Speed Unit is
set to [1] Hz.
Note 5: The default value depends on the number of motor poles. For
a 4 poled motor the international default value is 1500 RPM and for
a 2 poled motor 3000 RPM. The corresponding values for North
America is 1800 and 3600 RPM, respectively.
5.4.1 Parameter Data Check
1. Press [Quick Menu].
2. Scroll to Parameter Data Check and press [OK].
Illustration 5.12 Parameter Data Check
3. Select Parameter Data Check to view all
programming changes or Last 10 Changes for the
most recent.
TM
AF-600 FP Design and Installation Guide
North American
default parameter

5.5 Parameter Menu Structure

value
Speed 4-20 mA
Establishing the correct programming for applications
often requires setting functions in several related
Infinite auto reset
parameters. These parameter settings provide the
frequency converter with system details it needs to
operate properly. System details may include such things
as input and output signal types, programming terminals,
minimum and maximum signal ranges, custom displays,
automatic restart, and other features.
•
•
•
•

5.5.1 Quick Menu Structure

K-01
K-02
P-02
P-07
F-05
P-03
F-04
P-06
F-01
F-02
F-07
F-08
F-10
F-15
F-16
H-08
P-04
Table 5.2 Quick Start
DET-768b
See the keypad display to view detailed
parameter programming and setting options
Press [Info] in any menu location to view
additional details for that function
Press and hold [Main Menu] to enter a parameter
number for direct access to that parameter
Details for common application set ups are
provided in 6 Application Set-Up Examples.
Language
Motor Speed Unit
Motor Power [HP]
Motor Power [kW]
Motor Rated Voltage
Motor Current
Base Frequency
Base Speed
Frequency Setting 1
Operation Method
Accel Time 1
Decel Time 1
Electronic Overload
Motor Speed High Limit [Hz]
Motor Speed Low Limit [Hz]
Reverse Lock
Auto Tune
5 5
37