Key Icon Description; Recommendation - Icom IC-M803 Instruction Manual

KEY ICON DESCRIPTION

The keys are described in this manual as follows:
The keys that have words or letters on them are
described with the characters "[ ]�"
Example: [ENT], [CLR]
The Software Keys are described with the words or
letters on a blue background, such as
�
The functions of the keys are shown at the bottom of
the display� Push the key below the desired function�
You can use the following keys on the Menu screen�
FUNCTION
Select
Enter
Go to the next tree level
Go back to the previous
tree level
Cancel
Exit
The following action icons describe [CH/GRP], [ENT],
t e e pa e s an
z Rotate
: Rotate [CH/GRP] to select�
z Push
: Push [ENT] to enter or set�
z Push
: Push the Keypad keys to enter a digit
or text�
Pus
z Push
or
ACTION
Pus or
Push [ENT], [CH/GRP], or
�
Pus C GRP
or �
Pus C R or
�
Push [CLR]�
Push �
an
or to select

RECOMMENDATION

A T R MOT
FRONT PANEL THOROUGHLY IN A BOWL OF
FRESHWATER after exposure to saltwater, and dry
it e ore operating t er ise t e remote controller s
keys, switches may become unusable, due to salt
cr stalli ation
L The connectors on the rear panel do not meet IPX7�
NOTE: If the remote controller's waterproof
protection appears defective, carefully clean it with
a soft, damp (freshwater) cloth, then dry it before
operating� The remote controller may lose its
waterproof protection if the case or connector cover
is cracked or broken, or the remote controller has
been dropped� Contact your Icom distributor or your
dealer for advice�
O TRO R S
vi