E-Mail Operation; D Operation; D E-Mail Filter - Icom IC-M803 Instruction Manual

I e-mail operation
The IC-M803 is ready for HF e-mail operation— up
to 160 e-mail frequency channels, and a connection
terminal for an e-mail modem are available�
Independent e-mail frequencies with operating mode
an filter settings can e selecte
button, or group/channel selector rotation, for simple
operation�

D Operation

1� Connect your PC through an e-mail modem to
[AF/MOD] on the IC-M803 main unit front panel�
L See page 69 for connection details�
2� Start up the e-mail application�
L First, set up the necessary information given
from your provider for e-mail operation�
3� Pus or until
Software Key area�
4� Push then rotate [CH/GRP], or push
or to select t e esire e mail c annel
L [GRP] changes in 20 channel steps�
L Selecta le e mail re uencies ma
depending on your provider�
5� Follow the e-mail application instructions for
operation�

D e-mail Filter

en an e mail C is selecte
selected channel can be changed to Wide, Middle, or
Narrow�
1� Pus or until
Software Key area�
2� Push �
e filter i t of the selected e-mail channel is
•
changed�
it a pus o a
is displayed in the
i er
t e filter t pe o t e
is displayed in the
BASIC OPERATION
NOTE:
• For e-mail operation, you MUST make a contract
with an HF e-mail provider and purchase an
e-mail modem from the provider, or your dealer�
E-mail frequencies may need to be set by your
dealer, depending on your modem selection�
Ask your dealer for details�
• When a PC is connected, the remote controller
is inhibited and the screen as shown below
is displayed� Push
operation with the remote controller�
• When an e-mail CH is selected, the Voice
scrambler function cannot be turned ON�
5
5
to resume
15