YASKAWA SI-P3/V Installation Manual page 21

5 Installation Procedure
6. Connect the ground cable from the drive ground terminal to the PROFIBUS-DP Option
ground. When wiring the PROFIBUS-DP Option, pass the ground cable through the inside
of the drive bottom cover, then pass the ground cable into the through-hole at the front of
the PROFIBUS-DP Option.
through-hole
for ground cable
7. Attach the PROFIBUS-DP Option cover to the front of the PROFIBUS-DP Option.
Figure 2.12
Note: When using the drive in an area that may require displaying warning information in Japanese or
Chinese, a sticker has been provided with the PROFIBUS-DP Option. This sticker can be placed
over the English and French warnings on the front of the PROFIBUS-DP Option.
21
ground cable
ground
cable
Figure 12 Ground Cable Connection
Figure 13 Attach Cover
YASKAWA ELECTRIC TOBP C730600 23A V1000 Option PROFIBUS-DP Installation Manual
drive ground
terminal
Pass the ground
cable through
the bottom cover
of the drive.
tabs should line up