YASKAWA SI-P3/V Installation Manual page 20

Figure 2.9
Note: Cover removal for certain larger models with a Terminal Cover:
-Single-Phase 200 V Class: CIMR-V BA0006 to BA0020
-Three-Phase 200 V Class: CIMR-V 2A0008 to 2A0069
-Three-Phase 400 V Class: All models
Remove the terminal cover before removing the bottom cover to install the PROFIBUS-DP
Option. Replace the terminal cover after wiring the PROFIBUS-DP Option.
Figure 2.10
4. Reattach the bottom cover.
5. Connect the PROFIBUS-DP Option to the drive. Properly secure the tabs on the left and
right sides of the PROFIBUS-DP Option to the drive case.
Figure 2.11
YASKAWA ELECTRIC TOBP C730600 23A V1000 Option PROFIBUS-DP Installation Manual
A
A – Option unit connection: screw size = M3
B – Drive-side connection: screw size = M3.5 to M6
Figure 9 Ground Cable
Figure 10 Models with Terminal Cover
tabs should line up
Figure 11 Attach PROFIBUS-DP Option
5 Installation Procedure
B
tabs should line up
20