Hyundai 110D-9 Manual page 88

6) WORK LAMP SWITCH
OFF
ON
180D9OM16
7) AUTO/MANUAL CHANGEOVER SWITCH
1
2
3
50D9CD49
8) CABIN TILT SWITCH
1
50D9CD74
9) HAND PUMP LEVER
1 2
80D9CD75
(1) This switch is used to operate the work lamps by two steps.
First step : Front work lamp comes ON.
①
Second step : Rear work lamp comes ON.
②
(1) Manual mode (①)
Press the top of the switch for the manual mode of the autoshift
function. The operator selects the desired speed and the desired
direction in the manual mode with the gear selector lever.
(2) Automatic 1st mode (②)
Place the switch in the middle position for the autoshift function
changing from 1st to 3rd gear shift mode.
(3) Automatic 2nd mode (③)
Press the bottom of the switch fully for the autoshift function
changing from 2nd to 3rd gear shift mode.
(1) Horn ( )
By pressing position ①, the horn sounds and by releasing, the horn
stops.
Sound the horn to warn near by personnel, before tilting the
cabin.
(2) Tilting of the cabin (
Press the cabin tilt switch in order to tilt the cabin to right side or
return to original location.
Refer to page 7-18 for the tilting method of the cabin.
※
(1) This lever is used when tilting the cabin.
(2) Turn the hand pump lever to clockwise direction (①), the cabin shall
be tilted to right side by the cabin tilt switch.
(3) Turn the hand pump lever to counterclockwise direction (②), the
cabin shall be returned to original location by the cabin tilt switch.
3-32
, )