Hyundai 110D-9 Manual page 134

5) CHECK FAN BELT
(1) An deflection method can be used to check belt
tension by applying 11 kgf (25 lbf) force between
the pulleys on V-belts. If the deflection is more
than one belt thickness per foot of pulley center
distance, the belt tension must be adjusted.
(2) Inspect the fan belt for damage.
Transverse (across the belt) cracks are
acceptable.
Longitudinal (direction of belt ribs) cracks that
intersect with transverse cracks are not
acceptable.
Inspect the belt
- Embedded debris
- Uneven/excessive rib wear
- Exposed belt cords
- Glazing (high heat)
If any of the above conditions are present,
the belt is unacceptable for reuse and must
be replaced.
6) CHECK BATTERY
(1) Check battery and recharge or replace the
battery if necessary.
Battery maintenance need serious care and
safety service.
Refer to 10. REPLACEMENT AND CHECK in
SECTION 7 and always keep the safety
rules.
5-5
120096MA42
OK
NOT OK
120096MA43
2609A6MA47
36070FW05