Hyundai 110D-9 Manual page 143

4) INSPECTION AFTER ENGINE START
Inspect and confirm the following after engine
starts.
(1) Is the level gauge of hydraulic oil tank in the
normal level?
(2) Are there leakages of oil or water?
(3) Are all the warning lamps OFF?
(4) Check the following after warming up operation.
Is the indicator of engine coolant temperature
gauge (1) in the operating range?
Is the indicator of transmission oil temperature
gauge (2) in the operating range?
Is the engine sound and the color of exhaust
gas normal?
Are the sound and vibration normal?
Do not increase engine speed quickly after starting, it can make damage engine or
turbocharger.
If there are problems in the control panel, stop the engine immediately and correct problem
as required.
(5) Check engine exhaust color.
Exhaust gas color
Colorless, light blue
(6) Check fuel tank level.
50D93CD04K
Do not smoke or allow any flame near the truck when refueling. Refueling produces explosive
fumes. The truck should be refueled only at the specified refueling point.
Stop the engine and get off the truck when refueling.
Black
White
If the indicator points to F, the tank is full. If the indicator enters
the E range, refill the fuel tank immediately. Do not operate
the truck below this level. Do not use low quality fuel or fuel
mixed with kerosene. Clean the area around the cap before
adding fuel to prevent dirt from entering the tank.
Always fill the tank at the end of the day's operation. If air
remains in the tank, the moisture in the air will condense
inside the tank and form water in the fuel.
Check for incomplete combustion
Check for oil leakage
5-13
2 1
180D9OP06
Criteria
OK