Hyundai 110D-9 Manual page 114

Deleting a previously paired bluetooth device
④
If you no longer need to use a paired bluetooth device with the bluetooth radio, it can be deleted.
It is from the registration assignment for another mobile phone.
Refer to the example of paired devices shown table 2-1.
a.
Press SEND button, to select BLUETOOTH mode.
b.
Press SEL button and SELECT PHONE appears on the display.
c.
Turn selection knob, until DELETE PHONE is displayed.
d.
When DELETE PHONE appears on the display, press SEL button.
e.
Press the preset button to display the name of the bluetooth device name of the mobile phones or
music players previously paired. You may also turn selection knob to display the paired devices.
f.
Once the name of the bluetooth device you wish to delete is displayed, in this example Samsung,
press SEL button to have the Samsung device deleted.
g.
The display will then show DELETE NO or if selection knob is turned, DELETE OK on the dis-
play.
h. To confirm your wish to delete the selected device, when DELETE OK appears on the display
press SEL button.
i. If the bluetooth device being deleted (in this example) was connected, the display will show previ-
ous paired phone name "Samsung" and DISCONNECTED.
j. In the example above, the number of paired devices is now reduced to 3, leaving 3 vacant memo-
ry locations for additional devices. Table 2-2 shows the example.
Preset No.
1
2
3
4
5
6
Basic telephone operation
⑤
a. Using the bluetooth radio for hands-free calls
a)
When an INCOMING call arrives at the bluetooth radio via your connected bluetooth mobile
phone, INCOMING CALL appears on the display for 3 seconds then the calling telephone num-
ber is shown.
b)
Press SEND button to answer the INCOMING call. HANDSFREE appears on the display.
c)
To end the call, press END button and the call will end and END CALL is displayed.
d)
If you wish to reject an INCOMING call, press END button.
e)
To make an OUTGOING call use the keypad of the connected bluetooth mobile phone to enter a
number and press the OFF-HOOK (SEND) button on your mobile phone.
f)
OUTGOING CALL is displayed on the bluetooth radio and the call continues in hands-free
mode.
g)
The call can be ended by pressing END button the ON-HOOK (END) button of the connected
mobile phone.
※ Some mobile phones may not reject an INCOMING call using the action of d) above. In this
case, press the ON-HOOK button on the connected mobile phone to reject.
Bluetooth device name (for example)
LG
Apple
Motorola
EMPTY
EMPTY
EMPTY
Table 2-2
3-56