Hyundai 110D-9 Manual page 113

The bluetooth radio will give connection priority to the last connected mobile phone.
⒢
It is recommended that all other bluetooth devices other than mobile phones are switched off
⒣
during the registration or pairing process.
Disconnecting a bluetooth device
②
If you need to disconnect your bluetooth mobile phone or music player with the bluetooth radio, fol-
low the steps below.
a. Press END button for 2 seconds in any mode.
b. When the bluetooth connection is lost, bluetooth logo disappears and the previously connected
device name (e.g. Samsung or LG) and DISCONNECTED appear on the display.
Select a bluetooth device
③
The bluetooth radio can pair up to 6 bluetooth devices. A previously paired mobile phone or music
player can be selected for connection using the method described below. Refer to the table 2-1 for
examples.
Preset No.
1
2
3
4
5
6
a.
Press SEND button, to select BLUETOOTH mode.
b.
Press SEL button. SELECT PHONE will appear on the display.
c.
Turn selection knob, until SELECT PHONE is displayed.
d.
When SELECT PHONE appears on the display, press SEL button.
e.
Press the preset button to display the name of the bluetooth device name of the mobile phones or
music players previously paired. You may also turn selection knob to display the paired devices.
Each time you turn or selection knob, the LCD displays as follows :
·
SAMSUNG
f.
If the bluetooth mobile phone name is Samsung as in the example of table 2-1, then Samsung
appears on the display. When preset button
the right.
g.
Once the name of the bluetooth device you wish to connect is displayed, in this example
Samsung, press SEL button to have the Samsung device connected.
h.
If the connection is successful, the bluetooth logo appears on the display and paired phone name
Samsung and CONNECTED appears on the display for 2 seconds.
Bluetooth device name (for example)
Table 2-1
LG APPLE MOTOROLA
1
3-55
Samsung
LG
Apple
Motorola
EMPTY
EMPTY
BACK SAMSUNG
is pressed or selection knob is turned 1 click to