Testing And Adjusting; Engine System - Hyundai 110D-9 Manual

1. ENGINE SYSTEM

1)
EASE OF STARTING, NOISE
(1) Set gear selector lever at NEUTRAL.
(2) Put the parking brake switch in LOCK
position.
(3) Turn ON start switch, automatically heat-
ing operated.
(4) When preheater pilot lamp goes out, turn
start switch to START, and start engine.
When engine starts, check if it starts
smoothly, and if it makes any abnormal
noise.
2) IDLING
(1) After warming up engine, run at idling.
(2) Check that engine maintains steady,
smooth rotation without gasping,
abnormal noise, abnormal explosions, or
irregular vibration.
(3) Check that idling speed is within specified
range.
(4) Idle rpm : SEE 8. SPECIFICATION
3) WHEN ACCELERATOR PEDAL IS DEPRESSED
(1) Check that accelerator pedal does not catch when depressed.
(2) Check that engine speed increases in accordance with amount pedal is depressed.
(3)
When doing this, check that engine speed changes without gasping, abnormal noise, abnormal
explosions, or irregular vibration.
(4) Check that exhaust gas is colorless when the engine is idling, and a thin black color when
accelerator pedal is depressed.
(5) Max speed : SEE SECTION 8. SPECIFICATIONS

10. TESTING AND ADJUSTING

Forward
Neutral
Backward
LOCK
Parking
brake switch
Accelerator pedal
10-1
110D9OM45
START
ON
OFF
Start switch
300D9OM10
160D7TA01T