Hyundai 110D-9 Manual page 61

(8) SCR cleaning inhibit pilot lamp
50D93CD30
(9) HEST (High exhaust system temperature) pilot lamp
50D9CL003
(10) DEF (Diesel Exhaust Fluid) level pilot lamp
50D93CD66
(11) Expendables replacement pilot lamp
50D93CD31
(12) Cooling fan reverse rotation pilot lamp
180D9CD30
This pilot lamp lights ON when the SCR cleaning switch is
①
pushed inhibit position, therefore automatic and manual SCR
cleaning can not occur. It should inhibited, before caused fire
due to the exhaust gas in high temperature.
※ Refer to the page 3-35 for the SCR cleaning switch.
This warning lamp indicates, when illuminated, that exhaust
①
temperatures are high due to SCR cleaning.
The lamp will also illuminate during a manual SCR cleaning.
②
When this lamp is illuminated, be sure the exhaust pipe outlet is
③
not directed at any surface or material that can melt, burn, or
explode.
When this lamp is illuminated, the exhaust gas temperature
could reach 800 ˚C [1500 ˚F], which is hot enough to ignite or
melt common materials, and to burn people.
The lamp does not signify the need for any kind of equipment
※
or engine service; It merely alerts the equipment operator to
high exhaust temperatures. It will be common for the lamp to
illuminate on and off during normal equipment operation as
the engine completes the SCR cleaning.
This gauge indicates the level of DEF (10 steps).
①
Fill the DEF when the level is low.
②
This lamp lights ON if expendables which must be replaced are
①
exist.
The lamp will light up only 3 minutes since KEY ON, and then
②
light off.
Please check the expendables management list in maintenance
③
menu.
This lamp lights ON when the cooling fan is operated to the
①
reverse rotation.
Refer to page 3-36 for the operation of the cooling fan.
※
3-14