Hyundai 110D-9 Manual page 210

(6) Remove the transmission oil filter cartridge.
Dispose of the used transmission oil filter
cartridge properly.
(7) Clean the filter cartridge mounting base.
Remove any part of the filter cartridge gasket
that remains on the filter cartridge mounting
base.
(8) Apply a light coat of oil to the gasket of a new
transmission oil filter cartridge.
(9) Install the new transmission oil filter cartridge.
Screw the filter in until contacts with the sealing
surface is obtained and tighten it now by hand
about 1/3 to 1/2 turn.
(10) Mount the drain plug of the transmission after
cleaning it.
(11) Fill the oil through the level gauge inlet and
check if the oil is at the appropriate level.
(12) The proper oil amount is 16 liters (4.2 U.S. gallons)
As the truck is hot after operation wait until
the temperature has dropped.
It is imperative to pay attention to absolute
cleanliness of oil and filter.
Binding is in any case the marking on the oil
level gauge.
7-41
Transmission oil filter
110D9MI43
73036MI14
Level
gauge
HOT
COLD
ZONE " HOT"
110D9MI41