Hyundai 110D-9 Manual page 187

7) TILTING CABIN
Keep clearance of people except the operator
before tilting the cabin.
Before tilting the cabin, make sure that the
mast is vertical or tilted forward. Otherwise, the
operation could be blocked by mast tilt
cylinders.
(1) Locate the truck on the plain and stable floor.
Apply parking brake before servicing.
Turn the start switch to OFF position.
(2)
Remove the frame cover (LH) by removing the
mounting bolts. The cabin tilt switch is located
between cabin and side frame.
By tilting the cabin, service of hydraulic and
(3)
electric system such as hydraulic components,
hydraulic pipings, electric components, and
electric wirings can be easily performed. It is
recommended that the service requiring tilting
cabin must be carefully performed with a skilled
service man.
(4) Tilting and returning cabin
Refer to page 3-32 for the cabin tilt switch
and hand pump lever.
Tilting cabin
After keeping clearance of the people except
the operator along with sounding horn, turn the
hand pump lever clockwise and then,
continuously press the cabin tilt switch to tilt the
cabin to right side.
Returning cabin
After keeping clearance of the people except
the operator along with sounding horn, turn the
hand pump lever counterclockwise and then,
continuously press the cabin tilt switch to return
the cabin to original location.
Take care that it must perform by a trained
people in order to prevent from abnormal
operation.
Lock lever
Hand pump
lever
7-18
Cover (LH)
Cabin tilting
switch
110D9MI63
180D9MI67