Hyundai 110D-9 Manual page 205

21) REPLACEMENT OF ELEMENT IN HYDRAULIC
TANK BREATHER
(1)
Loosen the cap and relieve the pressure in the
tank.
(2)
Loosen the screw and remove the cover.
(3)
Pull out the element.
(4)
Replace the element with a new one.
(5)
Reassemble by reverse order of disassembly.
Tightening torque : 1.14~1.74kgf m
22) REPLACE OF PILOT LINE FILTER
(1) Loosen the filter case.
(2) Pull out the filter element and clean the filter
case.
(3) Replace the filter element and O-ring with new
parts.
(4) Reassemble the line filter.
23) CLEANING BRAKE LINE FILTER
Remove the strainer from the filter body.
(1)
Wash the strainer with cleaning oil.
(2)
Install and tighten with specified torque.
(3)
Tightening torque : 4.5~5.5 kgf m
24) LUBRICATE RCV LEVER
Remove bellows and grease the joint (A) and the
sliding parts (B).
(8.2~12.6lbf ft)
(32.5~39.8 lbf ft)
7-36
Screw
Cover
Element
Air breather
Frame - RH side
Line filter assy
IN
OUT
Line
filter
PP
Cut-off
valve T
P
B1
Bellows
A
Cap
110D9MI18
Valve
Element
O-ring
Case
160D9MI23
110D9MI24
B
160D7MI25