Operator's Safety Rules - Hyundai 110D-9 Manual

16. OPERATOR'S SAFETY RULES

1) All operational functions require that the
operator be seated in the operator's seat.
Always buckle up if a seat belt is
provided.
2) The parking brake must be locked in the
LOCK POSITION before exiting from the
truck.
The parking brake must remain locked in
the LOCK position except when an
operator is in the normal operating
position.
3) OPSS REGULATIONS
This forklift truck is equipped with an Operator Existence Sensing System per ANSI/ASME
B56.1~7.21.10 and 7.21.11 (travel OPSS) or ISO 3961 (travel and mast OPSS) as an option.
*OPSS : Operator Presence Sensing System
(1) Traction safety warning
This function works when the key switch is ON or START position.
The transmission(power automatically cutoff) in 2 seconds from the driver's off the seat.
At the same time, the warning lamp ON and alarm will sound intermittently if drive lever was not
returned to neutral.
To release the function, the gear selector lever must be cycled through neutral with the operator
in the normal operating position to regain powered directional control.
(2) Parking brake warning
This function works when the key switch is not only ON or START position but also OFF
position.
Alarm sounds in 2 seconds from the driver's off the seat with the parking brake released.
To release the function, the parking brake switch must be turned to LOCK position.
When the key switch is OFF position, alarm will sound only for 30 seconds .
1 RELEASE
2 LOCK
1-18
110D9OM18
300D9OM24