Hyundai 110D-9 Manual page 13

10) SAFETY INSTRUCTION (Item 33)
This warning label is positioned on the left
window of cabin inside if the truck is for
equipped with *OPSS.
This forklift is equipped with an operator
existence sensing system per ANSI/
ASME B56.1-7.21.10 / 7.21.11 or ISO
3691.
Powered travel movement of the truck shall
1.
be possible only if the operator is in the
normal operating position. Transmission will
automatically shift to neutral upon the
exting of the operator.
2. The gear selector lever must be cycled
through neutral with the operator in the
normal operating position to regain
powered direction control.
3. Control of mast tilting, lifting and lowering is
not possible through operation of the
appropriate control when the operator is not
in the normal position.
11) ECU/TCU CAUTION (Item 25)
This warning label is located on the right
side of the frame.
Connector ,
separated from ECU and TCU before
any kind of welding.
12) ENGINE WASH (Item 19)
This warning label is positioned on the both
side of engine hood.
Don't wash the engine room.
, , should be
Truck for equipped with travel OPSS.
SAFETY INSTRUCTIONS
This forklift equipped with an operator existence sensing system
per ANSI/ASME B56.1-7.21.10 and 7.21.11.
Power travel movement of the truck shall be possible only if the
operator is in the normal operating position. Transmission will
automatically shift to neutral upon the exiting of the operator.
The Forward/Reverse lever must be cycled through neutral with
the operator in the normal operating position to regain powered
directional control.
Please review Operator's manual for safe operation of forklift
Truck for equipped with travel and mast OPSS.
SAFETY INSTRUCTIONS
This forklift equipped with an operator existence sensing
system per ISO 3691
Power travel movement of the truck shall be possible only if the
operator is in the normal operating position. Transmission will
automatically shift to neutral upon the exiting of the operator.
The Forward/Reverse lever must be cycled through neutral with
the operator in the normal operating position to regain powered
directional control.
Control of mast tilting, lifting and lowering is not possible through
operation of the appropriate control when the operator is not
in the normal position.
Please review Operator's manual for safe operation of forklift.
*OPSS : Operator Presence Sensing System
ENGINE WASH
0-10
92AW-00220
92AW-00221
92FT-00242
92FT-00242
92FT-40281
92HN-00261
92HN-00261