Table of Contents
Advertisement
Maintenance and servicing
10.5 "Device change" function
10.5
"Device change" function
Hazardous voltage.
Can cause death or serious injury.
The present device/part conducts hazardous voltages.
Touching live components will result in death or severe injury.
Installation, commissioning, and maintenance only by qualified specialist personnel.
The device replacement is only permissible by qualified personnel.
Operating principle
If the 3RW5 soft starter, the 3RW5 HMI High Feature (accessory) or the
3RW5 communication module (accessory) has to be replaced because of a fault, you can
transfer data to your new device (identical type) using the "Device change" function or
SIRIUS Soft Starter ES (TIA Portal). To be able to transfer data, you must first save it.
The following data are transferred with the "Device change" function:
I&M 1 data
I&M 3 data
Device parameters of the 3RW5 HMI High Feature
Communication parameters
Transmission options
Device change with micro SD card on the 3RW5 HMI High Feature (Page 205)
Device change with SIRIUS Soft Starter ES (TIA Portal) (Page 206)
204
WARNING
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter
Advertisement
Table of Contents
