Performing Firmware Update With Micro Sd Card (3Rw5 Hmi High Feature) - Siemens SIRIUS 3RW52 Equipment Manual

Maintenance and servicing

10.3 Performing firmware update with micro SD card (3RW5 HMI High Feature)

10.3 Performing firmware update with micro SD card
(3RW5 HMI High Feature)
Requirements
Micro SD card with valid firmware file (*.upd)
The valid firmware file is located in the root directory (topmost level)
3RW5 HMI High Feature
Menu: "Micro SD card > FW update"
Access protection to 3RW5 HMI High Feature is not active or has been reset.
Procedure
Note
Access to micro SD card.
Please note that the micro SD card is inserted in the 3RW5 HMI High Feature during
updating of the firmware.
Premature removal of the micro SD card from the 3RW5 HMI High Feature is not permissible
and will terminate updating of the firmware. Data could also be lost.
1. Select the folder of the respective device.
2. Select the firmware file of the device and confirm with the OK key.
You can see the firmware update is being performed from the progress bar on the
display.
Following successful updating of the firmware, the respective device then restarts
automatically.
Note
Firmware update of the 3RW5 HMI High Feature:
Please note that the display switches off for about 30 seconds when the firmware is
activated.
3. Check the new firmware version in the "Overview" menu.
Result
You have performed a firmware update for the selected device using the micro SD card.
198
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter