Table of Contents
Advertisement
Parameter assignment
6.13 Parameterize 3RW5 HMI High Feature serially / identically
6.13
Parameterize 3RW5 HMI High Feature serially / identically
If you want to parameterize multiple 3RW5 HMI High Features identically on different
3RW52 soft starters, you can parameterize them serially with a micro SD card.
Requirements
3RW5 HMI High Feature (accessory)
Micro SD card (Page 166)
Procedure
1. Parameterize the 3RW5 HMI High Feature (Page 124).
2. Plug the micro SD card into the 3RW5 HMI High Feature.
3. Load the parameters of the 3RW5 HMI High Feature onto the micro SD card.
Menu: "Micro SD card > Load communication and HMI parameters to micro SD card"
Example of a folder name created on the micro SD card: "1P3RW5 xxx-xxxxx"
Note the information in chapter Micro SD card (Page 166).
4. Remove the micro SD card from the 3RW5 HMI High Feature.
5. Plug the micro SD card into the 3RW5 HMI High Feature that you want to parameterize
identically with the original 3RW5 HMI High Feature.
6. Load the parameters of the 3RW5 HMI High Feature onto the 3RW5 HMI High Feature.
Menu: "Micro SD card > Load communication and HMI parameters to soft starter"
Note the information in chapter Micro SD card (Page 166).
7. If you wish, repeat the procedure for further 3RW5 HMI High Features.
Result
You have parameterized several 3RW5 HMI High Features identically on different
3RW52 soft starters.
126
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter
Advertisement
Table of Contents
