Siemens SIRIUS 3RW52 Equipment Manual page 66

Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI
Procedure for connecting with the HMI connecting cable
Observe the coding of the plug and socket
Lock the connector in the socket
The HMI connecting cable in the cable duct of the 3RW5 HMI Standard may only be
routed downward.
Make sure that you install the cable in accordance with EMC requirements. For example,
install data cables separately from the motor cable. Connect both sides of shielded
cables over a large surface area.
Result
You have installed the 3RW5 HMI Standard in the cabinet door and can commission it.
66
.
.
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
SIRIUS 3RW52 Soft Starter