Faults And Remedial Actions Of The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW52 Equipment Manual

9.5

Faults and remedial actions of the 3RW5 HMI High Feature

Display of the faults on the 3RW5 HMI High Feature
Detailed information about faults and remedial actions appears in plain text on the display.
Faults and remedial actions
Error
Error HMI
FW update not successful
Error during self-test
Write Error
FWUpdateInvalidSignature
No device answer
Loading language unsuccessful
Invalid signature 'Load additional
language'
1)
3RW5 HMI High Feature firmware version V3.0 or higher
1)
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
9.5 Faults and remedial actions of the 3RW5 HMI High Feature
Cause
Unrecoverable error detected
after internal diagnostics
(self-test, etc.).
The firmware is incomplete
and/or the firmware expansions
are incomplete or incompatible.
Unrecoverable error detected
after internal diagnostics
(self-test, etc.).
File cannot be written to the
micro SD card.
The firmware is incomplete
and/or the firmware expansions
are incomplete or incompatible.
The connection to the connected
soft starter has been interrupted.
Subsequently loading the
1)
language is incomplete and/or
the loaded language is
incomplete or incompatible.
Messages and diagnostics
Remedy
Replace the device.
Run a complete firmware update.
Check any error messages that occur.
Check to see whether or not the firmware update
was aborted.
Replace the device.
Check whether the micro SD card is inserted.
Check whether the micro SD card is
write-protected.
Run a complete firmware update.
Check any error messages that occur.
Check to see whether or not the firmware update
was aborted.
Check the connection between the HMI and the
device.
Ensure the languages are loaded completely.
Check any error messages that occur.
Check to see whether or not loading the
language has been interrupted.
181