Device Change With Micro Sd Card On The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW52 Equipment Manual

10.5.1

Device change with micro SD card on the 3RW5 HMI High Feature

Requirements
Procedure
3. Check the transferred data.
Result
You have transferred your saved data to your devices (3RW5 soft starter,
3RW5 HMI High Feature, 3RW5 communication module) with the "Device change" function.
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
3RW5 HMI High Feature (accessory)
Micro SD card with the saved data (Page 166)
– The folder (e.g. "1P3RW5 xxx-xxxxx+SLO...") is located in the root directory
(top level).
– The article number in the name of the folder must match the article number of the
3RW5 soft starter. The serial number in the name of the folder ("SLO...") does not
need to match.
– Menu: "Micro SD card > Load communication and HMI parameters to micro SD card"
The data is saved in an automatically generated folder
(e.g. "1P3RW5 xxx-xxxxx+SLO...").
Plug the micro SD card into the 3RW5 HMI High Feature.
Transfer the data to the device
(3RW5 soft starter, 3RW5 HMI High Feature, 3RW5 communication module).
Menu: "Micro SD card > Device change"
Note
Device change
The current data of all devices (3RW5 soft starter, 3RW5 HMI High Feature,
3RW5 communication module) are overwritten by the data on the micro SD card.
Maintenance and servicing
10.5 "Device change" function
205