Table of Contents
Advertisement
(6) To adjust the X-axis deviation, press the
keys to change the numeric value.
To adjust the Y-axis deviation, press the
to change the numeric value.
The displayed value changes in one-unit steps in a range from -80 to +80.
Each unit corresponds to 0.05 mm. For example, to correct a deviation of 0.3 mm, enter 6.
(7) When both corrective values are satisfactory, press the
NOTE
Your PEN WIDTH settings will be retained in the plotter's internal RAM even while the plotter is
turned off.
(X=) key and then use the
F2
(Y=) key and then use the
F4
ENTER key to register your values.
5 – 6
and
POSITION
and
POSITION keys
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
