GRAPHTEC FC4200-50 User Manual page 14

The warning label shown below is attached to the outside of this plotter's cover. Be sure to strictly observe
the precaution indicated in the label.
Daily Maintenance
During the course of daily plotter operation, be sure to observe the following precautions.
Never lubricate the mechanisms of the plotter.
If the plotter's casing becomes dirty, wipe the soiled areas using a dry cloth or a cloth that has been
moistened in a neutral detergent diluted with water.
Never use thinner, benzine, alcohol, or similar solvents; they will damage the casing's finish.
If the writing panel becomes dirty, wipe it using a dry cloth. In case of stubborn stains, use a cloth that has
been moistened in a neutral detergent diluted with water.
Never use benzine, thinner, alcohol, or similar solvents to clean the panel.
Storing Your Plotter
To store the plotter when it is not being used, be sure to observe the following points:
Remove the cutter and/or plotter pen attached to the pen holder and cover its tip with the protective cap
provided.
To protect the plotter from dust and dirt, cover it with a cloth.
Avoid storing the plotter in places subject to direct sunlight or high temperatures.
The Warning Label
Keep your hands and all other objects away from the
plotter's moving parts and their range of movement.
Daily Maintenance and Storage
CAUTION
xi