Specifications - GRAPHTEC FC4200-50 User Manual

Hide thumbs Also See for FC4200-50:
Table of Contents

Advertisement

11. SPECIFICATIONS

11.1 Specifications
CPU
Configuration
Drive system
Max. cutting area
Compatible media width
Max. cutting speed
Specifiable cutting speeds
Cutting force
Min. character size
Mechanical step size
Programmable step size
Repeatability precision
2
*
Distance precision
Perpendicular precision
Registration mark reading
*
3
precision
Max. no. of pens
Compatible blade type
Compatible pen types
Compatible cutting media
Interfaces
Buffer capacity
Resident command sets
LCD display
Rated power
Power consumption
Operating environment
External dimensions (W×D×H)
Weight (without stand)
*
1
HP-GL is a registered trademark of Hewlett-Packard Company.
2
*
The figure varies with the type of Graphtec-designated medium used and the currently selected cutting conditions.
3
*
Based on the precision when using the pen provided and high-grade paper to read this plotter's resident pattern.
4
*
For use with the CB15U or CB15U-K30 cutter blade.
5
*
For use with the CB15U-K30 cutter blade.
6
*
For use with the CB15UA cutter blade.
32-bit CPU
Flatbed cutting plotter
Fully-digital servo drive
590 × 430 mm
500 mm
65 cm/s
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60,
65 cm/s
10 to 600 gf
about 5 mm for alphanumerics (varies with the medium and font used)
0.005 mm
GP-GL: 0.1, 0.05, 0.025, 0.01 mm; HP-GL™: 0.025 mm
2
*
0.1 mm or less
[Travelling distance × ±0.2% or less] or ±0.1 mm, whichever is larger
0.3/430 mm or les
within 0.3 mm
2 pens can be concurrently mounted
Supersteel, ceramic, and sapphire blades
Water- and oil-based ballpoint pens
Marking film (polyvinyl, fluorescent, reflective)
Paper of 0.5-mm thickness or less (pattern paper, oilboard)
Compressed polystyrene sheets of 0.8-mm thickness or less
Sandblasting rubber of 1.5-mm thickness or less
High-luminance reflective film
RS-232-C serial and Centronics-compatible parallel interfaces (auto-
matic selection)
2 Mbytes
GP-GL and HP-GL™ (selected at the control panel)
20 characters × 2 lines
100 to 120 VAC, 50/60 Hz; 220 to 240 VAC, 50 Hz (specify when
ordering)
120 VA or less
10 to 35°C, 35 to 75% R.H. (non-condensing)
approx. 857 × 780 × 200 mm
approx. 19 kg
FC4200-50
*
6
11 – 1
FC4200-60
910 × 610 mm
666 mm
1
*
0.4/610 mm or less
5
*
approx. 1172 × 964 × 200 mm
approx. 26 kg
4
*
5
*

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fc4200-60

Table of Contents