Appendix A. Standard Specifications - GRAPHTEC Craft ROBO CC100 User Manual

Appendix

Appendix A. Standard Specifications

Appendix-1
Item
Feeding method
Drive
Cutting range
Effective sheet width
Operating speed
Loadable number of
blades/pens
Tools
Media types that can be cut
Interface
Rated power supply
Power consumption
Working environment
Guaranteed operating
environment
External dimensions
(W x D x H) (mm)
Weight
Specification
Grit-rolling
Stepping motor
Maximum: 200 mm x 1000 mm (in expanded mode)
A4 size supported
Loadable sheet width: maximum 260 mm, minimum 210
mm unless the carrier sheet is used
10 - 100 mm per second
(10 steps of 10 mm per second per step)
1 pc.
Blade with dedicated blade holder
General-purpose ballpoint pen (used only with the ballpoint
penholder)
Film Media 0.1 mm or less in thickness, liner-included
thickness of 0.3 mm or less
Inkjet or laser paper ( up to 157 g/m
Drawing paper, postcard
* Not all types of media can be cut.
USB 1.1 (USB 2.0 compatible)
Dedicated adapter, 24 V DC (1.875 A)
25 W (10 W or less during standby)
5 º - 40 ºC, 35 to 80 % R.H. (No condensation)
16º - 32º C, 35 to 70 % R.H. (No condensation)
Approx. 368 x 160 x 105 mm (not including the feed knob)
Approx.2.5 kg.
Appendix
2
)