Secure Charger And Install Cable Holster; Check The System; Figure 4. Close Versicharge; Figure 5. Secure The Charger And Mount The Holster - Siemens VersiCharge AC 8EM1312-4AF10-0AA3 Installation And Operation Manual

Figure 4. Close VersiCharge

2.5 Secure Charger and Install cable holster

Threaded Insert/
3rd Security Screw
Secure the holster to the wall
with 1 #8 x 2-1/2" Flat Head Drywall Screw

Figure 5. Secure the charger and mount the holster

1. Secure Charger to Mounting Bracket: Using the kit-supplied
tamper-resistant screw– secure the charger cover with one
screw on the side. Use the second screw (underneath the
charger) to secure Front Cover to the Charger.
2. Install Holster to Charger: Align Holster with guides in
charger. Using the kit-supplied tamper-resistant screw, use
the third screw to secure the holster to the charger (hole at
the top of the holster).
Standard installation – using the kit-supplied lag screw, screw
into the wall.
Alternate installation – using the 5th wallboard screw with
anchor, screw into the wall.

2.6 Check the system

1. Turn the power on; the white Power Available light should
illuminate. If it does not, verify that the outlet or wire is
putting out 240 or 208 V using the voltmeter.
2. With the Power Available light on, plug the Electric Vehicle
Supply Equipment (EVSE) cable into the car. If you have any
fault lights, please see the Operating/Faults Table in
Appendix A.
Siemens VersiCharge Mobile App (Residential Chargers Only):
Download the VersiCharge mobile app to your smartphone to
get started using your charger. Find these applications at
either Google Play (https://play.google.com/store ), or iOS
stores (https://www.apple.com/ios/app-store/).
Siemens Configuration Tool (Commercial Chargers Only):
Download the VersiCharge Configuration Tool (PC App) at
usa.siemens.com/versicharge. Unzip the tool to a PC and
install by following the screens. This tool will allow charger
management from a PC.
Secure Charger with 3
Tamper-resistant Screws
Installation and Operations Manual
WARNING! Do not force the connector into the
receiver on the vehicle. If the connection
between the receiver and connector shows any
resistance, inspect the pins in each and, if
damage is found, call a qualified service person.
| VersiCharge™ AC
11