Siemens VersiCharge AC 8EM1312-4AF10-0AA3 Installation And Operation Manual page 35

Electric vehicle charging station
Table of Contents

Advertisement

NOTE: Some errors are not caused by the VersiCharge, but by EV compatibility or by settings which are turned on in the EV. See the
Faults table below. If the unit is going into a fault state, check the settings in the EV. Many EVs have a setting for time-of-charge, for
example, in which the user defines the charging time. Settings like this will override all commands within the VersiCharge for safety
reasons and will stop charging. Adjusting the EV settings will resolve this.
Light State
Faults
#9 – Touch Sensitive Button – Reset Ground Fault – Press once to
Light #9
reset the unit.
#4 Fault occurring –
Light #4
Light flashing red
#4 + #7 (4 hr. delay light) –
Light # 4
Lights steady red
Light # 7
#4 + #7 (2 hr.+4 hr. delay light) –
Light # 4
Both lights are steady red
Light #7
#4+ #7 (2 hr. delay light) –
Light #4
Fault occurring
Light # 7
#4+ #7 (2 hr. + 6 hr. delay light) –
Light # 4
Fault occurring
Light # 7
#4+ #7 (2 hr.+ 8 hr. delay light) –
Light # 4
Fault occurring
Light #7
#4+ #7 (2 hr. + 4 hr. + 6 hr. +8 hr. delay light) –
Light # 4
Fault occurring
Light #7
#4+ #7 (4 hr. delay light) –
Light #4
Fault occurring
Light # 7
#4+ #7 (4 hr. + 6 hr. delay light) –
Light #4
Fault occurring
Light #7
#4+ #7 (6 hr. delay light) –
Light #4
Fault occurring
Light #7
#4+ #7 (8 hr. delay light) –
Light #4
Fault occurring
Light #7
#4+ #7 (4 hr. + 6 hr. +8 hr. delay light) –
Light # 4
Fault occurring
Light # 7
Steady light –
Flashing light –
Touch Senstive Button -
Description
NOTE:
Light #1 is the Power Status LED.
Light #2 is the Car Connected Status LED.
Light #5 is the WI-Fi LED status.
Light #4 is the LED Fault light.
Light #7 is the Time Delay LED Light bar with 2, 4, 6, and 8
hour delay lights – some combination of lights 4 and 7 indicate
the fault.
Light #9 is the Touch Sensitive Button.
Installation and Operations Manual
Solution
The unit is in a fault state. Press
one time to reset the ground
fault.
Power cycle/turn breaker off
and then on
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
Call Tech Support
| VersiCharge™ AC
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents