3
Installing the G1330B Thermostat
Installing the G1330B Thermostat
Stage 4: Installing the Sample Tray
1 Load the sample tray with sample vials as required.
2 Slide the sample tray into the autosampler so that the rear of the sample
3 Press the front of the sample tray down to secure the tray in the
34
tray is seated firmly against the rear of the sample-tray area.
autosampler. If the tray pops out of its position the air channel adapter is
not inserted correctly.
Figure 13
Installing the Sample Tray
1200 Series AT User Manual