Transporting the Thermostatted Autosampler
When moving the autosampler around the laboratory, make sure that any
condensed water inside the thermostat is removed. Tilt the module to the
front, so that the water inside the thermostat can safely flow into the leak
funnel. Otherwise no special precautions are needed for the modules.
The autosampler thermostat is heavy (20.7 kg, 45.6 lbs). Carry the module by putting your
N O T E
hands under the side covers in a central position of the unit.
If the autosampler needs to be shipped to another location via carrier, ensure:
• The two modules are shipped in separate boxes.
• The transport assembly of the autosampler is parked, see "Park Arm (Park
• The vial tray is secured.
If the autosampler is to be shipped to another location, the transport assembly
of the autosampler must be moved to the park position to prevent mechanical
damage should the shipping container be subjected to excessive shock. Also,
ensure the vial tray is secured in place with suitable packaging, otherwise the
tray may become loose and damage internal components.
1200 Series AT User Manual
Gripper)" in your respective Service Manual.
Installing the G1330B Thermostat
Transporting the Thermostatted Autosampler
3
41