Button Manager Settings - Sharp MX-B200 Operation Manual

Button Manager settings

Once installed, Button Manager normally runs in the background in the Windows
operating system. If you need to change Button Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
"Outline of Button Manager" (p.53)
1
Right-click the Button Manager icon (
select "Settings" from the pop-up menu.
The setting screen of Button Manager will open.
If the Button Manager icon does not appear on the task bar, click the
"Start" button, select "All Programs" ("Programs" in Windows 2000),
select "Sharp Button Manager Y", and then click "Button Manager" to
start Button Manager.
2
Click the tab of the scan menu that you want to set up.
3
Select the start-up application in the "Application Selection"
area.
When the "Show TWAIN setting screen when scanning" checkbox is
selected, the scan setting screen appears when scanning is executed to
let you adjust the scanning conditions.
Button Manager scan menu (factory default)
Display/Button Manager menu
The start-up application must be installed before using.
4
Set up the "Colour Mode", "Edge" and other scan settings in
the "Scan Setup" area.
5
Click the "OK" button.
This completes the settings.
Downloaded From ManualsPrinter.com Manuals
SC1:
SC2:
SC3:
SC4:
SC5:
SC6:
52
) on the task bar, and
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
6