Button Manager Settings - Sharp AR-M160 Online Manual

3 SCAN

Button Manager Settings

Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button
Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
☞
Outline of Button Manager
1
Right-click the Button Manager icon ( ) on the
task bar, and select "Settings" from the pop-up
menu.
The setting screen of Button Manager will open.
If the Button Manager icon does not appear on the task
Note
bar, click the "start" button, select "All Programs"
("Programs" in Windows 98/Me/2000), select "Sharp
Button Manager A", and then click "Button Manager" to
start Button Manager.
2
Click the tab of the scan menu you want to set
up.
CONTENTS I N D E X
3
Set up the start-up application in the
"Application Selection" area.
●
When the "Show TWAIN setting screen when
Note
scanning" checkbox is selected, the scan setting
screen appears when scanning is executed to let you
adjust the scanning conditions.
●
If an application other than "Sharpdesk" is selected in
the "Application Selection" area, only one original can
normally be scanned. If "Sharpdesk" is selected,
multiple originals loaded in the SPF/RSPF can be
scanned in a single operation.
4
Set up the "Color Mode", "Edge" and other scan
settings in the "Scan Setup" area.
5
Click the "OK" button.
This completes the settings.
32