Service Menu Features - Tektronix 2245A Operator's Manual

Most of the items in the SERVICE MENU are for diagnostics, troubleshoot­
ing, and calibration. However, there are three menu selections that are
also for operational use: CONFIGURE, SELF CAL MEASUREMENTS, and
MAKE FACTORY SETTINGS. Press the CH 1 and CHOP/ALT Vertical
MODE buttons at the same time to display the SERVICE MENU, as shown in
Figure 3-3. Menu selections are made using VERTICAL MODE buttons that
correspond to the menu prompts appearing at the right side of the crt dis­
play.
A menu-selection underline appears under the SERVICE MENU heading.
Pressing the ADD button (down arrow) moves the underline down; the CH 1
button (up arrow) moves the underline up.
Once the desired item is underlined, select RUN (CH 2 button) to start the
selected process. Select Quit (CH 4 button) to exit the SERVICE MENU
and return to the normal oscilloscope operation.
SERVICE MENU/
DIAGNOSE
CONFIGURE
SELF CAL MEASUREMENTS
INTERNAL SETTINGS MENU/
EXERCISER MENU/
2245A Operators

Service Menu Features

Figure 3-3. Service Menu.
Operators Familiarization
T MENU (CH 1)
(ADD)
I
QUIT
(CH 4)
6558-12
3-9