Internal Settings Menu - Tektronix 2245A Operator's Manual

Operators Familiarization
In te rn a l S e ttin g s M e n u
The INTERNAL SETTINGS MENU (see Figure 3-5) consists of MAKE FAC­
TORY SETTINGS and ADJUST VERTICAL OUTPUT. MAKE FACTORY
SETTINGS can be performed by the operator; ADJUST VERTICAL OUT­
PUT is for use by servicing personnel. To return to SERVICE MENU, set the
up-arrow key to underline INTERNAL SETTINGS MENU and press the but­
ton again to display the SERVICE MENU. To return to the oscilloscope
mode, select QUIT from the INTERNAL SETTINGS MENU or SERVICE
MENU, or press the CLEAR MEAS'MT button.

INTERNAL SETTINGS MENU/

MAKE FACTORY SETTINGS
ADJUST VERTICAL OUTPUT
MAKE FACTORY SETTINGS. Sets the front-panel controls and menu con­
figurations as described in Appendix B.
3-12
Figure 3-5. Internal Settings Menu.
T MENU- (CH 1)
(ADD)
QUIT- (CH 4)
2245A Operators
6558-14