Tektronix 2245A Operator's Manual page 179

Tektronix
GOMMH imTOPCeU-£NCE
Product: 2245A OPERATORS_________________ Manual Part Number:
INSTALLING THE ACCESSORY POUCH
REFER TO THE ILLUSTRATION ON THE FOLLOWING
PAGE WHILE PERFORMING THIS PROCEDURE
1. Place the oscilloscope on a table or work bench with the rear
against a firm support or wall and the front facing you.
2. Center the rear of the pouch plate and insert the rear edge of the
plate in the space between the cabinet top and the rear panel trim
(see part A of illustration).
3. Move the pouch sideways as necessary to line up the key slots
in the pouch plate with the keys on the rear panel (the plate will be
centered when aligned) and push the plate all the way in (see part B
of illustration).
4. Grasp the pouch plate assembly with both hands near the front
of the assembly.
In the next step, use only enough force to clear the front panel
trim with the plate front edge. Excessive force will cause a per­
manent bow In the plate.
5. Push back on the plate and press down with the heels of your
hands to bow the plate enough to slide the front of the plate into the
space between the cabinet top and the front panel trim (see part C of
illustration).
6. Move the front of the pouch as needed to line up the key slots in
the plate with the keys on the front panel.
7. Release the pressure on the plate to allow it to return to its nor­
mal flat shape.
m a n u a c l h
Date: 5-8-89
DESCRIPTION
NOTE
Page 1 of 2
a n g i n e f o
Change Reference:
Product Group 46
r m a t i o n
_
Cl/0589
070-6558-01