Table of Contents
Advertisement
Chapter 2: Installation
Mounting Panels in a Desk or a Tabletop
24
The IconMaster control panels can be set into a desk or tabletop. (The optional
audio control panel must be attached to the main control panel before you
mount it; see "Connecting the Main Panel and Optional Audio Panel" on
page 21.)
Note
The control panels are easier to see and use if the tabletop or desk
is angled towards the operator. For illustration purposes here, the
trim has been removed. In a typical desk or tabletop installation,
the trim will remain attached.
Follow these steps to mount the control panels into a desk or tabletop:
1. Using the dimensions shown in Figure 2-8 (for the main control panel only)
or Figure 2-9 (for the main and audio control panels together), make a
cutout in the desk or tabletop.
2. Carefully place the control panels into the cutout.
Figure 2-8. Desk or Tabletop Mount of Main Control Panel Alone
16.75 inches (42.6 cm)
IconMaster Installation and Configuration Manual
10.1
inches
(25.7 cm)
Advertisement
Table of Contents
