Table of Contents
Advertisement
Chapter 9: Enabling a RouterMapper Database for Use with an IconMaster System
238
3. To update the database on your IconMaster, double-click the IconMaster
(MKE) sub-entry under the Configuration selection. The Configuration
for IconMaster (MKE) window will appear.
Figure 9-27. Configuration for IconMaster (MKE) Window
4. Highlight the device configuration you want to transfer, and then click
Perform Transfer to send the router database to the IconMaster. A
message will appear that asks you to confirm the transfer. Click Yes.
5. After the transfer is complete, click Refresh Device.
6. Any router database changes you made will become active on the
IconMaster within a few seconds. If you wish to change the assignment of
router sources to IconMaster inputs, use the IconMaster Configuration
Utility to make these changes.
IconMaster Installation and Configuration Manual
Advertisement
Table of Contents
