Table of Contents
Advertisement
Chapter 8: Configuring IconMaster
Preloaded Effects in Default Configuration Files
Before You Begin
172
For your convenience, several default configuration files are included on the
IconMaster SoftTools CD included with your IconMaster. These configuration
files include the following preconfigured effects:
•
Effect 1 = SQ-BRT, 1chl 35% window in upper right, with external
background
•
Effect 2 = SQ-BLT, 1chl 35% window in upper left, with external
background
•
Effect 3 = SQ-R, 1chl 75% H, 100%V on right side, with external
background
•
Effect 4 = SQ-L, 1chl 75% H, 100%V on left side, with preset background
•
Effect 5 = SQ-URT, 1ch 75% L-Bar window in upper right with preset
background
•
Effect 6 = SQ-ULT, 1ch 75% L-Bar window in upper left with preset
background
See page 148 for a list of files that are included.
Before you begin, ensure that you observe the following:
•
Each effect should be viewed as a sequence of events, like a filmstrip.
•
Each effect must be defined horizontally and vertically (the default position
of 0,0 is defined as the upper left corner of the screen).
•
All effects start with the Program full size. This is defined as Start A.
Note
For both single channel and 2 channel effects, the sequence will
end with either Program as the only full size on-screen image.
For a single channel effect, do not select the Dual Channel Effect check box.
•
Segment 1 defines the position and size at the end of the first transition.
•
There is an entry only for Program.
•
The background may be External Background or Preset.
•
The end of the effect is set by Program.
For a single channel effect, the effect must end as a full-size Program or
Preset.
For a 2-channel effect, select the Dual Channel Effect check box.
•
Segment 1 defines the position and size at the end of the first transition.
•
There is an entry for both Program and Preset.
•
The background may be External Background or Preset.
•
The end of the effect is set by End A and End B.
•
The effect must end as one of these options:
IconMaster Installation and Configuration Manual
Advertisement
Table of Contents
