Harris IconMaster Installation And Configuration Manual page 157

IconMaster Installation and Configuration Manual
Table 7-6. Effect Transition Settings for IconMaster Entries in
ovrtrans.tbl (Continued)
Field
Ending DVE squeeze preset
Ending transition or DVE squeeze
duration (mm:ss:ff or S/M/F)
Horizontal wipe on ending transition?
Vertical wipe on ending transition?
Reverse wipe direction on ending
transition?
Number of transitions used in effect
Effect audio from background (on-air) or
foreground (effect)
Audio transition is mix (foreground audio
effects)
Audio transition rate (foreground audio
effects only)
Over mix mixer (blank if not over mix)
Input A duck level (-100 – 0)
Input B over level (0 – 28)
Time before transition to re-route video
Time between effects for DVE transition
Delay before starting 2nd background
effect source
Delay before starting 3rd background
effect source
Chapter 7: Automation Setup
Value
This should have the same value as the
"Beginning DVE squeeze preset" field
This should have the same value as the
"Beginning transition or DVE squeeze
duration (mm:ss:ff or S/M/F)" field
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
2
IconMaster
B (The does not support
audio from effect sources)
N (although not used by the
driver, this field may not be left blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
Ignored for ICONMASTER (leave blank)
IconMaster
141