Harris IconMaster Installation And Configuration Manual page 29

IconMaster Installation and Configuration Manual
Scenario 3: All Components Ordered at the Same Time and
Preinstalled; Platinum Router, CENTRIO. eBox
Step
1. Mount the control panel(s) into a desktop or a rack
2. Connect the control panel to another device
3. Install NEO frame into a rack
Mount Platinum router into a rack
Operation Manual)
4. Configure eBox
5. Configure Platinum
6. Configure CENTRIO
7. Attach breakout modules
8. Connect the NEO modules to another device
9. Check card-edge parameters are set to your preferences
10. Configure IconMaster control panel
11. Initialize IconMaster
12. Customize push buttons on control panel
Scenario 4: Audio Control Panel Ordered Separately, All Other
Components Ordered at the Same Time and Preinstalled; Internal
(NSM) Routers
Step
1. Connect main control panel to audio control panel
2. Mount the control panel(s) into a desktop or a rack
3. Connect the control panel to another device
4. Install NEO frame into a rack
5. Configure NSM modules
6. Attach breakout modules
7. Connect the NEO modules to another device
8. Check card-edge parameters are set to your preferences
9. Configure IconMaster control panel
10. Initialize IconMaster
11. Customize push buttons on control panel
(see Platinum Installation, Configuration, and
Chapter 2: Installation
Explained
page 23
page 28
page 37
page 121
page 121
page 121
page 43
page 38
page 69
page 147
page 126
page 63
Explained
page 21
page 23
page 28
page 37
page 77
page 43
page 38
page 69
page 147
page 126
page 63
13