Table of Contents
Advertisement
IconMaster Installation and Configuration Manual
Figure 8-19. Transitions Quick Select Dialog Box
By selecting a Transition check box, you recall the state of the transition
settings, as described in Table 8-6.
Table 8-6. Quick Selects Options for Transitions
Quick Select Option
Background Transition
Background Source
Effects
Transition Rate
Transition Type
Click Select All to enable all transition features for that quick select. Click
Select All again to unselect all transition features for that Quick Select.
If Auto Take is selected, when the Quick Select is recalled to the PST, and a
take is activated to send the PST content to the PGM. The previously shown
PST content is not preserved. If Auto Take is not selected, you can achieve the
same effect by pressing Take on the Control Panel.
Note
A breakaway transition cannot be saved in a Quick Select.
Chapter 8: Configuring IconMaster
Saves and recalls the state of the BKGD button on
the control panel
The source that is on the Preset bus (whether the
background is on or off)
All effects that are set on the transition
The preset duration for transitions
The shape of the transition
181
Advertisement
Table of Contents
