Table of Contents
Advertisement
Tools You'll Need
IconMaster Installation and Configuration Manual
The following is a list of tools and equipment you will need for a successful
IconMaster installation. (Your particular installation may or may not require all
of these items, depending on which options you purchased.)
1. Desk or table with cutout; use the dimensions found on page 24
OR
One standard 19-in. (0.4-m) rack and four to eight 40×1/4 flat-head screws
2. One medium Phillips screwdriver
3. For a direct setup (MKE-3901 directly to IconMaster control panel), one
36-in. (91-cm) crossover cable
4. For a network setup (IconMaster to Ethernet)
•
1 network hub, at least 10Base-T or 10/100Base-T
•
Standard 10 Mbps 10Base-T Ethernet cable segments no longer than
382.08 ft (100 m) for IconMaster control panel, MKE-3901 module,
and MGI-3903 module
5. RS-232 or TIA/EIA-422-B cable segment; no longer than 50 ft (15 m) for
RS-232, and 2,000 ft (610 m) for TIA/EIA-422-B, for use with external
router or automation control device
6. NEO FR-3901, FR-3903, and FR-3923 Mounting Frames Installation and
Operation Manual
7. Internal routing device module, as appropriate (NEO NSM-7×2SHD or
NSM-7×2AES)
8. External routing device, as appropriate (Platinum, Panacea)
9. External routing device manual, as appropriate:
•
(For use with NSM-7×2SHD internal routers) NEO
NSM-8×1SHD/NSM-7×2SHD SD/HD Wideband Video Routing
Switchers Installation and Operation Manual
•
(For use with NSM-7×2AES internal routers) NEO
NSM-8×1EAS/NSM-7×2AES Serial Digital Audio Routing Switchers
Installation and Operation Manual
•
(For use with Platinum 9RU, 15RU, and 28RU frames) Platinum Series
Frames and Modules Installation, Configuration, and Operation
Manual
•
(For use with Panacea frames) Panacea Series Frame and Modules
Installation, Configuration, and Operation Manual
10. (For use with optional CENTRIO multiviewer) CENTRIO Multiviewer
Installation, Configuration, and Operation Manual and CENTRIO Layout
Designer User Guide
11. (For use with optional eBox) eBox Ethernet to Serial & GPI Interface Users
Manual
Chapter 2: Installation
19
Advertisement
Table of Contents
