Table of Contents
Advertisement
Chapter 8: Configuring IconMaster
Quick Selects for External Keys
Quick Selects for Internal Logo Keys
178
The External Keys tab of the Quick Select Configuration dialog box has options
for recalling both the visual and audio portions of the two external keyers.
Figure 8-16. External Keys Quick Select Dialog Box
When you enable External Keys selections, you recall the state of the settings
assigned to the keyer at the time the quick select was saved. You can enable or
disable selected keyers, which will remove those keyer functions from the
corresponding quick select.
When there is a check mark for Ext Key 1 and Ext Key 2 for a Quick Select, that
quick select will store and recall the visual conditions of that keyer, including its
transparency, screen location, etc.
When there is a check mark for Ext A/O 1 and Ext A/O 2 for a Quick Select,
that quick select will store and recall those external audio overs.
Click Select All to select both external logo keys and both audio overs on that
Quick Select. Click Select All again to unselect all components of both external
logo keys and both audio overs for that Quick Select (row).
Each of the four internal logo keys can have its state and/or its content saved as
part of a Quick Select.
IconMaster Installation and Configuration Manual
Advertisement
Table of Contents
