1-Port Sfp Mini-Physical Interface Module Leds; 1-Port Sfp Mini-Physical Interface Module Supported Modules - Juniper SRX Series Manual

1-Port SFP Mini-Physical Interface Module Supported Modules | 42

1-Port SFP Mini-Physical Interface Module Key Features | 40

1-Port SFP Mini-Physical Interface Module LEDs | 42

1-Port SFP Mini-Physical Interface Module Basic Configuration | 199
1-Port SFP Mini-Physical Interface Module LEDs
The 1-Port Small Form-Factor Pluggable Mini-Physical Interface Module (SFP Mini-PIM) has two LEDs
located to the right of the socket.
Table 25: 1-Port SFP Mini-PIM LED States
LED Color
LINK Green
ACT Green
RELATED DOCUMENTATION
1-Port SFP Mini-Physical Interface Module Overview | 39
1-Port SFP Mini-Physical Interface Module Hardware Specifications | 41
1-Port SFP Mini-Physical Interface Module Network Interface Specifications | 20
1-Port SFP Mini-Physical Interface Module Supported Modules | 42
1-Port SFP Mini-Physical Interface Module Key Features | 40
1-Port SFP Mini-Physical Interface Module Basic Configuration | 199
1-Port SFP Mini-Physical Interface Module Supported Modules
You can customize the Ethernet interface type by using different 1-port small form-factor pluggable (SFP)
modules. Table 26 on page 43
Table 25 on page 42
State
On
Off
Blinking
Off
shows the supported 1-Port SFP modules.
describes the LED states.
Description
Port is online
Port is offline
Port is receiving or sending data
Port might be on but is not receiving or sending data
42