Juniper SRX Series Manual page 10

Using the CLI | 219
8-Port Gigabit Ethernet SFP XPIM Basic Configuration | 221
8-Port Serial GPIM Basic Configuration | 225
16-Port Gigabit Ethernet XPIM Basic Configuration | 229
24-Port Gigabit Ethernet XPIM Basic Configuration | 229
Using the J-Web Interface | 230
Using the CLI | 230
Dual CT1/E1 GPIM Basic Configuration | 232
Using the J-Web Interface | 232
Using the CLI to Configure the CT1 Interface | 233
Using the CLI to Configure the CE1 Interface | 234
Quad CT1/E1 GPIM Basic Configuration | 235
Using the J-Web Interface | 235
Using the CLI to Configure the CT1 Interface | 236
Using the CLI to Configure the CE1 Interface | 237
Mini-Physical Interface Module and Gigabit-Backplane Physical Interface Module
Operating Modes and Supported Modules | 239
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes | 239
Replacing Interface Modules
5
Overview of Replacing Interface Modules | 242
Required Tools and Parts for Replacing a Mini-Physical Interface Module | 242
Required Tools and Parts for Replacing a Gigabit-Backplane Physical Interface Module | 243
Preventing Electrostatic Discharge Damage to the SRX Series Services Gateway | 244
Replacing Mini-Physical Interface Modules | 246
Removing a Blank Mini-Physical Interface Module Faceplate from the SRX Series Services
Gateway | 246
Installing a Mini-Physical Interface Module in the SRX Series Services Gateway | 247
Removing a Mini-Physical Interface Module from the SRX Series Services Gateway | 249
x