Juniper SRX Series Manual page 104

CAUTION:
third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC)
can help you diagnose the source of the problem. Your JTAC engineer might recommend
that you check the third-party optic or cable and potentially replace it with an equivalent
Juniper Networks optic or cable that is qualified for the device.
Table 44: 2-Port 10- Gigabit Ethernet XPIM SFP+ Transceivers
Product Number
SFPP-10GE-SR
SFPP-10GE-LR
SFPP-10GE-ER
SFPP-10GE-LRM
Copper Twin-AX 1m
Copper Twin-AX 3m
Copper Twin-AX 5m
Copper Twin-AX 7m
If you face a problem running a Juniper Networks device that uses a
Interface Type
10GBase-SR Ethernet optical
transceiver SFP, 26 m reach
10GBase-LR Ethernet optical
transceiver SFP, SMF, 10 Km
reach
10GBase-ER Ethernet optical
transceiver SFP, 40 Km reach
10GBase-LRM Ethernet optical
transceiver SFP, MMF, 220 m
reach
10GE Ethernet cable assembly
plugs into SFP+ socket, 15 m
reach
10GE Ethernet cable assembly
plugs into SFP+ socket, 15 m
reach
10GE Ethernet cable assembly
plugs into SFP+ socket, 15 m
reach
10GE Ethernet cable assembly
plugs into SFP+ socket, 15 m
reach
Media Connector
MMF LC
SMF LC
SMF LC
MMF LC
Direct Attached 30 Cable connector with
AWG 1 m cable length
Direct Attached 30 Cable connector with
AWG 3 m cable length
Direct Attached 24 Cable connector with
AWG 5 m cable length
Direct Attached 24 Cable connector with
AWG 7 m cable length
86